The factory setting is high. To switch to low bass mode, press and hold the Bluetooth button and the minus button simultaneously for 10 seconds without playing music. Repeat the process to return to the default high bass setting.Īnd finally a warning! Harman does not recommend using the low-frequency mode, as the Onyx Studio 5 is not designed to use bass in normal operation. It is used to test the speaker before it is approved for sale. Playing in low-frequency mode may damage the speaker and void the warranty. You can’t really control the bass from the device itself, only from the paired device. However, there are two basic modes, high and low. In fact, you may encounter a little problem. If you need to play your music at a civilized level for the neighbors, the bass can dominate at low volumes and smile in the mid and high ranges. So either you will lose part of the middle / upper part of the track or you will play it too loud and your neighbors will end up on your door or floor.Ī few more notes on the bass, as it is a feature of the Studio 5 sound. When it comes to details, the first thing that catches your eye is the foundation. In technical terms, the frequency response is flat with a base gain, but that doesn’t do it justice. The base is like a beat for the solar plexus, you can really feel it, especially around 50-60Hz. The Onyx Studio 5 has a massive 120mm subwoofer and 25mm highs (which is 2 passive radiators, not mentioned in the specs though), 50 watts of total system power, and a 50 Hz frequency response.
In a word, Sublime! For a speaker of this size and price, the sound quality is one of the most outstanding qualities. The fantastic sound quality is higher than many Bluetooth speakers that cost a lot more. One AUX input. This is a quickly disappearing feature from many Bluetooth speakers, so it’s good to see that it’s still included in Studio 5.īack to menu ↑ How does the Studio 5 sound?.Red / flashing: low battery. (The only downside is that there is no indicator of how low the battery is or how long it will last.)Īt the bottom rear, there are three entrances:.White / solid: Bluetooth / wireless dual audio connected.White / fast flashing: Wireless dual mode pairing mode is on.White / slow blink: Bluetooth is not connected.White / flashing: Bluetooth pairing mode works.Power button. This also acts as a hint button. Just press twice to play the next track.īelow the control buttons is an LED that changes depending on what happens:.
0 kommentar(er)
